當前位置： 首頁/ 產品展示/ 意大利BERNIO微型減速電機/ 蝸輪蝸桿直流減速電機
蝸輪蝸桿直流減速電機MVSF737/30/26
|
型號Type |
減速比Ratio |
L mm |
* 空載轉速R.P.M. no load min-1 |
* 轉速R.P.M. S1 min-1 |
扭矩S1 Torque Nm |
* 轉速R.P.M. S2 min-1 |
扭矩S2 Torque Nm |
最大扭矩Max Torque Nm |
I max A |
| 737 3026 160 | 160 | 156 | 31 | 27 | 0,5 | 23 | 1,1 | 4 | 5.4 |
| 737 3026 320 | 320 | 156 | 17 | 14 | 1,05 | 14 | 2,1 | 7,6 | 5.4 |
| 737 3026 640 | 640 | 165 | 7,8 | 7,3 | 1,7 | 6,5 | 4,2 | 10 | 3 |
| 737 3026 1280 | 1280 | 165 | 3,6 | 3,2 | 2,6 | 2,9 | 4,8 | 10 | 2 |
12/24 Vdc 22 W | 26
Gear motor with worm screw and standard motor ? 37x34 12/24 Vdc 5000 RPM output W, with noise suppressor.
Driving shaft mounted on two bearing and bushing. Outlet shaft supported by two bearings.
Design to give low RPM in little dimension
* The rotation speed can change of ± 10%.
The S1 load test was made using a 0,8 A corrent in the air with an increase of temperature of 70 C°
The S2 load test was made using a 1,5 A corrent in the air with a timing 5` ON 5` OFF with an increase of temperature
of 80 C° max
The starting corrent is 5.4 A and cannot be maintained for more than 2"
Max forces wich may act on the outlet shaft: Axial 25 kg, Radial 40 kg
It is possible to apply an encoder.
- 意大利TSA氣動馬達
- 意大利TSA氣動平衡臂
- 德國DEMAG氣動馬達
- 意大利BERNIO微型減速電機
- 德國德馬格（DEMAG）氣動主軸
- 筒倉板結清理設備
- 氣動磁鐵
聯系人：吳先生
電話(Tel):020-85596561 23313582
傳真(Fax):020-85596561
手機(MOB)： 13826444075 13602491772
地址(Add):廣州市天河區六運一街17號407 510620
郵箱:tsachina@163.com